Intellinet-network IDC-862 Hardware Installation Guide Manuel d'utilisateur télécharger pdf (Page 4)

I/O Terminal Block

The Intellinet Network Camera provides an external I/O terminal block

which is used to connect input / output devices such as alarms or sensors.

The pin definitions are described below

PIN Definition Description Max. V/A

Ground

+ 5V DC

5V DC

0.5W

AUDIO_In(+)

Unbalanced, 1.4Vp-p, 1Vrms, terminal block

AUDIO_In(+)

Unbalanced, 1.4Vp-p, 1Vrms, terminal block

Digital Output

Uses an NPN transistor with the emitter connected to

the GND pin. If used with an external relay, a diode

must be connected in parallel with the load for

protection against voltage transients.

100 mA

24V

Digital Input 1

Connected to GND to activate, or leave floating (or

unconnected) to deactivate.

30V DC

1 2 3 4 5 6 7 8 9

Pas de commentaire

Intellinet-network IDC-862 Hardware Installation Guide Manuel d'utilisateur Page 4