Intellinet-network NSC18-WN User Manual Manuel d'utilisateur télécharger pdf (Page 33)

WEB MANAGEMENT INTERFACE

3.5.4 FTP Conguration

As mentioned in 3.5.1 Motion Detection, these settings need to be

enteredbeforeyoucanusethe“SendsnapshotletoFTP”option.

FTP Server — Enter the IP address or hostname of the FTP server.

FTP Port — Enter the port number of the FTP server.

User Name — Enter the FTP server username.

Password — Enter the FTP server password.

Remote Folder — Enter a remote folder name to be used on the FTP

 server.Ifnothingisentered,alluploadedimageleswillbeplaced

in the FTP server’s root directory. If necessary, ask the FTP server’s

administrator which folder should be used, as some names may carry

 restrictionsthatlimitleplacement.

Passive Mode—Select“Enable”toactivatethemode;“Disable”toset

 tonon-passivemode.ThoughmostFTPserversworknewitheither

 mode,somerequirepassivemode.Ifyoundonemodeisn’tworking,

try the other. If you don’t know, ask the FTP server’s administrator.

Apply — Click to put any of the above settings/changes into effect.

Upload a test le—Clicktoconrmthatyoursettingsarevalidand

that the function is operating properly.

3.5.5 SD Card Conguration

Maketheseentriessoyoucanndlessavedonyourcard.

File Name Prex — Enter

what will appear before

 thelesequencenumber.

Destination Folder — Direct

 wheretostoretheles.

Apply — Click to put any of the above settings/changes into effect.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 59 60

Pas de commentaire

Intellinet-network NSC18-WN User Manual Manuel d'utilisateur Page 33