Intellinet-network NSC15-WG User Manual Manuel d'utilisateur télécharger pdf (Page 74)

- 74 -

Camera -> Network -> Bonjour:

Bonjour is a service that, just like UPnP, helps to find the network camera on

the network. Bonjour is available for Windows, but is more commonly used for

MacOS. Refer to section “4.1.2 MacOS” for additional information on the usage.

Bonjour: On: Enables the service (on by default).

Off: Disables the service.

Device name: Enter the name of your camera here. This is the name the

Bonjour service will display. If you have more than one

camera installed in your network, this is an easy way to

differentiate among the cameras.

Camera -> Network -> IP Notification:

The camera can inform the user via e-mail about the IP address it is set to. If

the camera is set up with a dynamic IP address (default), then the camera IP

address may change from time to time as the DHCP server (router) may assign

a new IP address when the so-called Lease Time has expired. If the camera is

connected directly to a cable or DSL modem, the IP address also changes

frequently (or infrequently, depending on your ISP).

In both cases it is useful to have the camera send you an e-mail that includes

the current IP settings.

In order to use IP Notification, you need to set up e-mail related parameters. If

you do not know this information, you need to contact your network

administrator.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 114 115

Pas de commentaire

Intellinet-network NSC15-WG User Manual Manuel d'utilisateur Page 74